Exterior - 147" L x 87" W x 86 3/8" h.
Interior - 138" L x 81 1/2" W x 74 1/2" h.
Heat transfer coefficient - U-Factor-0.28 BTU/hr/sq. ft./F
Payload - 5000 lbs - standard configuration (adaptable for higher payloads).
RFI shielding - with addition of RFI modification kit MK-1079/G, attenuation of 60 db minimum over spectrum of 150 KHz to 10,000 MHz for electric and magnetic fields and plane waves whenmeasured in accordance with MIL-STD-285.
Water tightness -completely water-tight; tested on 21 inch fording depth and to simulated rainfall.
Operating temp. - -65F to +125F plus solar load. Non operating temp. -80F to +160.
Mounting member support loads - Wall, roof and floor tensile load of 2000 lbs. Followed by 100 inch pounds torque load 5/16" - 18 inserts.
Latching device - three point roller cam latching mechanism provides ease of personnel door operation while maintaining weather and RFI integrity
Roof load - snow and ice load of 75 lbs./sq.ft.
Skids - three full length replaceable shock absorbing type.
Floor load - strength to accept 2500 lbs. over any 3 sq.ft. area without permanent set.
Roof access - three recessed folding steps in side wall and one roof handhold.
Panel Construction Hot bonded sandwich consisting of polyurethane foam core, aluminum skins and a framework of high strength all riverted aluminum alloy extrusions.
Lifting eyes - four (4) eyes with 3" inside clearence 14,400 lbs.tensile load per corner in any direction.
Towing eyes - four (4) eyes with 2" inside clearance. 14,400 lbs.tensile load per corner in any direction.

 

S-280-I.D.F type unshielded